Skip to main content

VAT rate changes in Netvisor

This guide can be utilized in VAT rate change situations in Netvisor, such as the new general VAT rate of 25.5% effective from 1.9.2024 or the new reduced VAT rate of 13.5% effective from 1.1.2026.

NOTE! The latest reduced VAT rate of 13.5% will be added to Netvisor during December. Once the VAT rate has been added, you can utilize mass tools.

Application instructions

Always check the Tax Administration's guidance in change situations. In this instruction, the Tax Administration deals with the application of the new reduced VAT rate of 13.5%: The government proposes reducing the 14 percent VAT rate to 13.5 percent starting from 2026

Settings

In Netvisor, it has already been possible to add new decimal VAT rates yourself and these have been used in situations where the company has been VAT liable abroad.

We will add the new VAT rate of 13.5% for our customers during December and update the instructions once this addition has been made.

New tax rates can also be added directly if necessary. This can be done in Financial management > Settings > Accounting settings > Accounting and obligations settings > Tax rate management.

Once the new VAT rate has been added to the accounting settings, it is then available for selection in different Netvisor functions.

It is possible to update the VAT rate for multiple posting rules simultaneously. This is done in Posting rules management once we have added the new VAT rate to Netvisor for all our customers. Select the desired posting rules in the view and at the bottom of the page use “Change selected tax rate x% -> x%".

Products

Updating the VAT rate of products in Netvisor can be done in bulk or alternatively the VAT rate can be updated for individual product cards. Note that the VAT rate change for the TEMP product cannot be done with the bulk function, but must be changed directly on the product card. The product VAT rate update takes effect immediately when the change is made and is automatically applied, for example, to newly created Sales invoices. As the transition period between two VAT rates can be quite long, we recommend checking the invoices for the correct VAT rate if the situation does not apply the default VAT rate in the product information.

You can update the VAT rate for individual products directly from the product card. This is done on the Basic information editing tab of the product card, where you select the new VAT percentage in the VAT rate field. Our instructions: Product card.

We recommend using the bulk function of the product listing to update VAT rates.

List the desired products in the product listing and select them using the checkbox on the left side. Then, in the bottom left corner of the page, the button "Add selected to process basket" is activated; however, do not add the products to the process basket, but instead click the smaller button (white triangle) to the right of it to open the bulk actions menu and select "Change selected products' tax rate".

Note when updating products whose VAT rate is 14% that this must be set as the starting value in the field "From VAT", and in the field "To VAT" you select the new tax rate of 13.5%. When the starting value is given, only those selected products whose VAT rate has been 14% are updated.

The system separately reports the result of the update:

Our instructions: Product listing

Although mass tools can be used to update large quantities of products at once, we recommend dividing large registers to be updated into parts, e.g. a few product groups at a time. Alternatively, the product listing can be sorted by the VAT rate used without product grouping and the products can be divided into batches of, for example, 5000 items at a time. This particularly helps with monitoring the VAT rate update, as the mass tool reports in numbers if the VAT rate of some products could not be updated. It is also expected that many of our customers will make changes simultaneously, which can be sped up by using the mass tools in smaller batches. We therefore recommend making all VAT change bulk updates in batches of about 5000 items so that you can complete the changes smoothly and more quickly in the settings.

Accounts receivable

Sales orders and invoices are formed with the VAT rate defined for the product. As during the transition period you will often have to handle both the old and the new VAT rate side by side, it is necessary to change the VAT rate on the order and invoice if a VAT rate different from the product information is applied. If possible, we recommend avoiding creating large numbers of sales orders and invoices in advance in Accounts receivable if their VAT % must be edited after the order or invoice has been created, in order to avoid manual work.

The VAT % of the sales order can be edited on the order lines as long as the order has not been invoiced. Invoiced order lines can no longer be edited. Similarly, the VAT % of the Sales invoice lines can be edited until the invoice is sent and an accounting voucher is created for it.

If a situation arises where a Sales invoice has been sent to the customer with an incorrect VAT %, it is recommended to credit the incorrect charge invoice using the function on the invoice: “Sales invoice actions > Create credit note”. In this case, the original invoice details are copied to the credit note and finally a new charge invoice can be created with the correct VAT % details.

From Sales > Reports > Invoice line report you can retrieve the VAT % column to the view, allowing you to check the VAT % used per invoice line.

Our instructions: Invoice line report

Once there is a voucher for the Sales invoice, the check of the VAT rates used can be done from accounting reports, such as the General ledger, or alternatively by limiting the desired time range on the VAT calculation to examine accounting entries under different tax rates. In the search criteria of accounting reports, the report search field can be filtered from the "VAT rate" field.

Contractual invoicing

In contractual invoicing, the VAT % is directly derived from the product information, so the VAT % on the Sales invoice line is the product's VAT % at the time the invoice is created.

Contractual invoicing has a bulk function that can be used to update the fixed gross price of service baskets to a fixed net price so that the VAT percentage change is transferred to the product's tax-inclusive price. You can find the mass tool as follows: Sales > Billing > Contractual invoicing. Select the desired service baskets by ticking the box in front of the service basket name, after which the button "Update net price for basket products" is activated at the bottom of the screen. If fixed gross prices are used and no fixed net price is updated for the products, the VAT percentage change in this case affects only the product's tax-free price. If the products' VAT rate has already been changed to the new VAT rate, follow the instructions below.

If a new VAT rate has been set behind the product as the new VAT rate and the product has been in the service basket of contractual invoicing as a gross-priced product, the product's VAT rate change has affected the tax-free price and the price may in these cases be incorrect. To correct the situation, you should first update the product's VAT rate back to the old VAT rate. After this, update the net price for the desired basket from contractual invoicing using this mass tool.

Once this has been done, change the correct new VAT rate back behind the product. After the change, the price is updated correctly and the increase appears in the product's gross price.

If invoices have already been created with the wrong price and the invoices have not yet been sent to customers, you can delete the invoices. After deletion, the invoices are transferred to the deleted material of the service basket. You can access the deleted material via Sales > Billing > Contractual invoicing > click the desired service basket > Invoice creation > Deleted material. Once the VAT change described above has been made, recreate the deleted materials, at which point the correct price has been updated for the product.

If automatic sending is used for the Sales invoices to be created, we recommend paying special attention to ensure that the applicable VAT % has been checked and edited on the invoice before sending. Our instructions: Automatic sending of sales invoices.

Handling of advance payments

In accordance with the Tax Administration's guidance, the handling of advance payments during the transition period differs from the performance-based nature of goods or services. According to the guidance, the applicable VAT rate is determined by when the money from the advance payment has been received by the seller. Especially when the customer pays for the goods or services partially in advance, it may be necessary to use two VAT rates. In such cases, it may be necessary for the seller to divide the order lines into their own VAT rates according to what portion is an advance payment and what portion is invoiced upon delivery. When handling advance payments in accounting, the amounts are divided into their own VAT rates where necessary, so that the VAT entries for advance payments for the target month can be reported. Our instructions: Handling of advance payments.

Accounts payable

Purchase invoice automations

We recommend checking the company's purchase invoice automations during the transition period. If a model invoice has been used for posting in the automation rules, the model invoice should be updated in future to one that uses the new VAT rate.

Vendors

You can edit the vendor's default VAT % on the vendor card. The VAT % for multiple vendors can be updated in bulk via the vendor listing. First go to Purchases > Vendors > Vendor listing. Select the desired vendors from the listing using the checkbox on the left and Actions > Update tax rate.

Select the "old VAT rate" in the From field and the "new VAT rate" in the To field and finally the Update button:

Bookkeeping and obligations

In Netvisor, the VAT identifier processed on the account is selected in the specification of accounts settings, so as a rule the change of VAT rate during the transition period does not require changes to the specification of accounts. For example, if the VAT identifier KOMY is selected in the accounting account settings and domestic sales is used as the tax treatment, the accounting entries are reported and the VAT account entries are calculated on the VAT calculation correctly according to the VAT rate used.

In accordance with the Tax Administration's guidance, particular attention must be paid to temporal allocation. The basic rule in temporal allocation is performance-based, i.e. to allocate VAT from sales to the calendar month during which the goods are delivered or the service is performed and, correspondingly for deductions, when the goods or service are received. In certain situations, cash-based or invoice-based allocation can also be used in temporal allocation. The obligation to pay tax does not therefore determine the tax period for which VAT is reported. Temporal allocation works well in Netvisor during the transition period, so ensure, for example on Sales invoices, that the correct VAT rate is used considering the performance basis.

According to the Tax Administration's guidance, events under both the old and the new VAT rate are reported technically in the same section on the VAT return. The new VAT rate is therefore reported from Netvisor in the same way as previously.

During the transition period, we recommend checking the VAT calculation with particular care to ensure that the correct VAT rates have been selected for events according to application. If it is necessary to modify a previously reported VAT return, a corrective VAT return can be sent from Netvisor: Sending a corrective VAT return.

Integrations

Netvisor also supports decimal VAT rates via the interface.

When importing material via the interface, the VAT percentage comes from another system, i.e. the connected system must be able to produce a decimal VAT percentage for the material.

In order to import material via the interface to Netvisor with a decimal VAT percentage, the VAT rate must have been created in Netvisor. If you want to import material with the new VAT rate before the VAT rate has been added to Netvisor in advance, you must create the VAT rate in Netvisor (see section Settings).

Rackbeat stock management

If your company has open orders during the change, you must yourself ensure that they have the correct VAT rate.

In Rackbeat, the VAT rate is managed via product groups. You can update the tax rates of product groups either manually or using an Excel file.

Instructions for different situations:

  • Order/Invoice is a draft: When you have updated the system with the new VAT rate, it is not updated automatically on the draft. You must retrieve the product again on the order or invoice line, after which the new tax rate is updated.

  • Order is confirmed: The tax rate of a confirmed order line cannot be changed directly. If you need to change the VAT rate, reopen the order for editing. Then remove the old line completely and add a new line in its place.

  • Order is delivered but not invoiced: If the order has been made with the old tax rate and the products have already been delivered, the tax rate change made in the system no longer affects the invoice. The invoice is created with the original order line details, i.e. the old tax rate.

Payroll and travel

During the transition period, we recommend paying special attention when making travel expense reports to ensure that the VAT % used on travel expense report lines corresponds to the receipt. By default, the lines show the "Current Finnish VAT rates" selected in the accounting settings:

Next to the field there is a small green arrow button, from which all the company's VAT rates can be selected:

In the company-specific salary type settings, a default VAT percentage may have been set for the salary type, which must be updated to the correct one during the transition period where necessary. Our instructions: Company-specific salary types.

*This article has been translated using an AI-based translation tool. The contents or wording of these instructions may differ from those in other instructions or in the software.
*

Did this answer your question?